Saturday, December 1, 2012

Updates and Expiraments

So, I’ll start with the cats as has been my tradition as of late. 

Bronx – my oldest male cat is a F1 Bengal.  He is very true to breed – just take a look at how long his nose and paws are compared to other housecats.  Additionally, he epitomizes breed by being aloof, and not wanting to be held.  He’s not a “pick up and cuddle” type of cat.

Despite that, and much to my chagrin since I am the primary treat giver of the house – Bronx likes men – he usually picks the strongest man in the room (alpha male type strong, not physical) and commands that they honor him.  Bronx prefers the strong, silent type; generally the person who is either ignoring him or expressing apathy.  This honor is fulfilled by him sitting on their lap and surveying the room.  He is NOT asking to be petted, and don’t you dare try to hold/cuddle him from that.  He’s there to show he’s king.

A couple weeks ago – our friend Rich was over.  Rich was sitting in hubby’s usually spot on the couch, and is a similar in temperament to Chris.


Notice how he is watching the room?

Annual Vacation

I just got back from our Annual vacation to Daytona Beach.  Each year, I pack some handwork projects to do, and last year I blogged from there about the beautiful fabric orchids I made.  I also usually put in 20-30 hours of work

This year, I was naughty on all counts
·         I went to the hot tub almost every night
·         I stayed up late and slept in
·         I swore I was going to do yoga at a nearby studio every day – I went once
·         We went to a movie
·         We did go karts, nitro dragsters and the arcade
·         I bought clothes and lingerie
·         I sat in the sun and read books
·         We went on an Eco Tour
·         We went into Orlando to our favorite CD shop

It was a nice vacation, and despite taking a bunch of yarn, crochet cotton, knitting needles and crochet hooks along, I did very little. 

I had taken a good amount of specialty yarns that I’ve collected – intending to make some scarf/jewelry pieces and a few other things.  I did use up one skein of an expensive yard to make the basis for a decorative belt.  I need to finish it off with some complementary yarn to make a fringe.

Here’s what I have:


And here’s the yarn I used.  If there’s a few yards left after fringe, I’ll pair it with white and make a tie scarf/neck drape.

I also started a scarf.  It’s decorative rather than functional.  My goal is to use up two skeins of white eyelash, one skein of pink/beige cotton yarn and at least half a skein of a multi colored ladder yarn.  The rest of which will be used for scarves


Quilting

Original Sewing and Quilting Expo Review

 Not worth the price – don’t go.

Oh, you wanted more than that….?

I can do that.

I started going to this event about eight years ago.  I was at the Sheraton in Bloomington, took up several large rooms, some small rooms, and the hallways.  It took 3-4 hours just to wind through the selling booths, and I got a lot of great stuff.

It went downhill from there; it’s been getting consistently smaller and this year was awful.

In past years, there have been many sewing/embroidery machine dealers and at least THREE commercial/semi commercial embroidery machines on display.  This year:  NONE, just the Viking dealer.

It took me under an hour to see all the selling booths. 
·         No big collections of fabric anywhere
·         No Hancock (but not a big loss)
·         Only one booth with any amount of pre-cuts, and barely any
·         Vogue fabrics which used to have a HUGE booth, with tons of notions, softwares, etc., was not there at all
·         Barely any show items

I won’t be going again.  I’ll stick to the MQ show which has a ton of booths and lots of displays.

Elinor’s Tree Skirt

I buy fabric because I like it…. Not for a particular project.

That’s one reason why I have a very large stash….

Lots of things attract my attention…

It also could be because I’m a bit of a hoarder ….

Or that I NEED to have a large palette to choose from….

Or that I’m just crazy…

Just saying…..

Anyway, on one of my many shopping expeditions, I found a charm pack of Christmas themed sock monkeys.

Yes…. I said Christmas themed sock monkeys… don’t those two concepts always go hand in hand?

After all, there are PINK sock monkeys too…. Here’s proof!


Back to the subject intended…. Shortly before I was going down to Albuquerque to visit Elinor (and it was near Christmas time), I decided I needed to bring something.

Or, I may have decided that I needed to start clearing out my collection of “I must do something with this” fabrics…..

Either way, I took that charm pack and made a small quilt out of it.  The pattern that I used was the “Tossed Nine Patch”.  You can refer back to one of my first blog articles here for some directions.

This year, Elinor has decided to use the quilt (it’s about 35 inches square) as a skirt of sorts for their small Christmas tree.  Her comment in text when she sent me this picture was:  “2 people have already compliment/asked were (sic) they can get one J”

Twin City Quilting Block of the Month

I’m still plugging away at the BOM.  I missed last Month (November) to go to the Original Sewing and Quilting Expo (should have skipped that instead), and I still have to go pay my $5 penalty and be contrite.

Meanwhile, here is the center laid out on my living room floor. 

Glass

I’ve been putting a little more time into glass work than fabric lately.  I have a few classes scheduled, and a long list of ideas.

My original plan with glass was to purchase a kiln of my own sometime early in 2013.  I do not think that is going to happen now.  I still have way too much to learn about the actual operation of the kiln.  Additionally, I really enjoy my time at the studio and I think it’s a good learning atmosphere as well as being a good social activity.

I passed on this glass fever to some other people! 

The small contracting firm that I work for (but not at; I work at a client location) is virtual.  We have no offices.  Every few months, we get together.  Some of those get togethers are business related, but a few are social.  I convinced the management to hold one of the social get togethers at my favorite studio (The Studio at Rush Creek).  We had 18 people, made 12 inch plates, and a good time was had by all. 

A few people from that night are going to return to the studio.  A couple are interested in classes and I believe one person is going to have a children’s party there.  It feels really good to both spread my hobby and to gain business for a woman who’s taught me a lot! 

I will admit, however, to some jealousy at the creations made that night!

Using up Stock, aka Experimenting

When I first started doing studio time with glass, I was instructed by that mentor to buy COE 90 glass.  (COE = Coefficient of Expansion, and you can NOT mix COEs).  Her studio was a 90 studio.

Since then, I’ve decided that I much prefer another studio, and that most studios open to the public use 96 COE.  I’ve also found 96 to be a bit cheaper.  90 has some really cool specialty glass, but I can buy just those and make special projects (It’s expensive for the really nice glass – too expensive to have a “stash” of it).

I’ve made the decision that my stash is going to be 96 and that’s all I’ve been buying lately (except for the rare specialty piece).  However, since I initially bought quite a bit of 90 – have to have a good palette! – I have some to use up.  My goal over the next few studio sessions to make pieces exclusively with the 90 in order to reduce what I have of it.  While I’d like to have options, it can be disastrous (cracking, etc) to mix COEs in the kiln and I want to reduce the chances of doing that accidentally.

To this end, I decided that I’m going to “play” with the 90; make weird pieces, try odd things, etc, just to see what things will do.

I want this blog, and these pictures, to be a log of attempts and results.  I tend to forget what I did, and look at the finished piece and wonder how I got there!

First – here’s the loaded kiln:


Piece One

Nothing too experimental here.  This is one of my “My Style” pieces.  It’s about 8x10.  All the pieces – including those cut from rods – are 90 COE.  It’s the standard two layers of glass, with some areas have little pieces on top to make a third and a fourth layer.  I don’t expect any real surprises here.


Piece Two

This piece is about six inches square.  The bottom of this is a THIN layer of medium blue transparent glass.  It’s thinner than most I’m used to working with.  Also, there is NOT a second full layer.  Glass wants to be ¼ inch thick.  What I expect to happen to the bottom piece is that it will shrink where there isn’t anything on top of it.  It should turn out with scalloped edges.

There are white solid squares on top, then light blue transparent squares on top of those.  Since the blue is light, and transparent, I expect it will lighten considerably.

Lastly, the circles on top are pieces cut from a millifiore rod.  They are actually a 104 COE.  In the past, when I’ve used 104 COE millifiore pieces on other COEs – there’s been some light cracking around the edges.  (Note:  104 is soft, 90 is the hardest of the COEs used in fusing).  However, I’ve noticed the cracking when the millifiori is large (approaching ½ inch) or many are laid out next to each other.  These pieces are quite small (about 5/16th inch) and laid out singly.  I am also interested to see what they do against the transparent background.  And a final thing to observe – does the very thin bottom layer, and lack of other solid layers affect the melting/cracking potential?


Piece Three

This piece is about seven inches square.  This is another attempt to play with single layers.  The bottom layer is a transparent green that is also thin as in the above piece.  I’m hoping for scallops along the sides, but not the top or bottom.

The next layer is a solid purple, and then a solid white, about 1/8th of an inch (maybe 3/16th) white laid on the top.  Those were DIFFICULT to cut out!


Piece Four

I then moved on to smaller pieces and using some thin copper foil I have.  This piece is about 3 x 4 inches.

I found the following on a website about fusing:

During the process of firing, copper oxidizes. The areas that oxidize the most turn turquoise, the areas with less oxidation turn red. The oxidation occurs in the kiln in the hours before the glass begins to fuse. Once the edges of the glass have fused, the oxidation process stops.

So, I’m very interested to see what happens with the copper and the different colors of glass

In this piece, I put copper lines on a piece of solid bright green and covered it with clear glass.


Piece Five

This piece is copper hearts (they weren’t the easiest to cut out!).  The piece is shy of one inch wide – which should give you an idea of how small the hearts are.  I first attempted to use scrapbooking paper punch to cut them out, but the metal is too strong for that, even though it is thin.

I overlapped the white with the clear by a good margin.

I’ll admit… this was done out of laziness.  I’m just experimenting, so I didn’t want to spend a lot of time cutting….

However, after reading that passage about the oxidation stopping when the glass fuses, it will be very interesting to see if the overlap affects that time


Piece Six

This piece is also shy an inch wide.  It’s going to be very interesting to see both shrinkage and oxidation on this.  The fancy green solid glass is much wider than the clear on top.  There is nearly ¼ inch exposed on both sides.  The clear also does NOT completely cover all the copper.  I wonder what will happen to the exposed edges?


Piece Seven

This piece again does the top (clear) overlapping the bottom (white).  The cutout star takes much more of the surface than the hearts mentioned above.  I think this should affect oxidation.

Small bit of advice – while most people can eyeball and cold cut a heart – don’t try it with a star!  I just couldn’t figure it out.  I finally turned the copper over and drew and star with a sharpie.  When I was drawing it, it was so automatic and simple!  Yet, that doesn’t translate to cutting…..


Piece Eight

Yet another overlapping clear over white with copper bits in-between.  However, on this one, I put a piece of fiber paper (fiber paper does NOT burn up in the kiln) in between to make a channel.  I wonder how that space will affect the oxidation?


Piece Nine

Done with the copper.  Now I’m just playing with some scraps.  Piece of transparent green on the bottom, piece of white over it, and then a strip of green along the top.  I want to see what the under lap chunk on the bottom does AND what the strip does at the top and bottom where it has a lot of overlap.


Piece Ten

Green and purple – definitely my personal palette!  This piece is closer to ½ inch wide.  The bottom layer is a scrap of white.  The second layer is a piece of transparent clear.  The spots on top are a deep purple solid.  I’m quite interested in seeing how the colors.

I’ve also put fiber paper into this one to make a channel. 


Finished Pieces

Inspiration is a funny thing.  Two weeks ago, I put some pieces into the kiln.  I only took pictures of the two plates.  The interesting thing about both these plates is that there is a great lack of originality combined with some of my special techniques.  I’ll explain more with each description.

When I went into the studio two weeks ago, I was feeling a bit lack luster.  I’d just seen all the plates that my firm had done at their social outing and I was jealous of some.  I also had a lot of noise in my head from those… too many designs, techniques, etc. 

Bit of background.  I am notorious for sorting.  Things MUST be organized.  So, to clear myself, I pulled in all my glass from my mobile studio (aka the trunk of my car).  I sorted, organized, played with, and came to the conclusion that I had too many pieces of some colors and that became my starting point.

Additionally, when my firm did their outing, I wound up with all the scraps of glass.  Most of the people there weren’t going to do glass again, AND even if they did, they weren’t going to store a stash like me, so it only made sense I got the scraps of the paid for sheets.  Many of these pieces were cut from for other projects.

Note:  both plates are 12 inches, slumped to the “square in square” design.

Plate One

Black scraps are threatening to overwhelm my stash.  I had a lot from my own projects, and then a couple people did plates using black bits, so I wound up with an over full container of small black pieces, in addition to larger pieces. 

I did the technique of laying down powder and the cutting “mosaic” pieces from scraps and arranging them to make the second layer.  I used both black and clear pieces, with a couple black iridescent scattered in.  They are framed by red strips, which are decorated with other black pieces.  The fusing is not a completely full fuse; there is a little bit of nubby texture on the pieces.

 

Plate Two

One of the team mates at the outing made a plate with strips of reds and browns.  I took her leftovers, combined them with a few other colors and viola!  Total artistic stealing…. But I like it.  It will make a good present for someone……


Teaser

I have a bunch of new beads.  I’m getting better!

However, I’m tired and it’s late….

Tomorrow….

Saturday, November 3, 2012

Quilts Are To Be Used!

Since it is already established that I’m a Crazy Cat Lady…. We’ll start with the obligatory cat picture.


And, while on the subject of just plain crazy… and interpret any part of this story as who/what is crazy about it… J

My daughter Ana’s birthday in a few days and I’ve been gathering up some presents for her.  She gets nothing big; we bought her tires for her car which is supposed to be a combination birthday/Christmas present…

But…

I’m her mom… she’s my lovely daughter… so things will be bought!

She’s a Packer Fan.  (That’s football by the way, if you are like me and really have no clue about sports). 

I’m also an EBay fanatic… you can find some odd, odd things out there….

Very odd…

Like these:



Yes, silk panties with the Green Bay Packer logo all over them. 

Not Just for Display

What is a quilt?  What is its purpose?

Not an easy question, and I get very upset with the low opinions that many people have about quilts now days.  The quilts that I make are not cheap, cheesy or poor quality.  I am not “crafty”, my things are not “home-made”; rather, I create handmade art.  I think that myself – and ALL the other people out there who work with fabric – deserve to have our pieces compared to museum art rather than bedspreads sold in bedding packs at Mega Mart (made up name – but you know what I mean).

Someone once asked me what I’d sell a particular quilt for.  I quote them a LOW price compared to the price of materials and the amount of work that I put into it.  Their response?  “oh, I could buy a quilt AND sheets at <retailer> for a fraction of that!”.  Other quilters have reported that people think their prices should be lower because “you love to do this”.

Really?  REALLY?!?!

This is serious art work people! 

That said – In my opinion, quilts are also a useable commodity.  One of my current compliments from my daughter Ana is that she wore out a quilt that I made for her!  I’m not upset in any way that it’s come to the end of its useful life; quite the contrary – I’m thrilled that it’s been so appreciated!!!

I have made MANY quilts over the last two years, and many of them do sit in piles around the house… I just can’t use that many, I’ve given away over a hundred pieces, and everyone I know has a quilt!  I love making them!

But, here’s some proof that I do use them…

Here’s my room currently.  The quilt that you see is one that I made purposely for myself a few months back.  The “focus” fabric on it as a batik that I bought at a Nancy’s Notions event two years ago.  It’s in many places on here.  Look at the block that at the right side, top (above a pillow) that has an outer row of bright green.  Now look at the block right below it.  The left side of that block is two squares and the right side is a single fabric – that is the focus fabric.  Now, look at the block in the bottom middle.  To the left of it is a block that is mostly purples.  The outside row of the block is the focus fabric.  You’ll also notice it in other places.


I took that fabric, and a variety of purple, green, beige and other complementary batiks and made what I call the “square in square” block.  There was no real plan.  I made large blocks, and ¼ sized blocks, and just put them together to make the larger blocks.  I used a few pieces – including a whole large square – of the focus fabric to fill in and completed.  I used up a lot of scraps of batiks AND created a king sized quilt that is serving me nicely right now as the weather gets colder. 

You cannot see – but there are two other quilts beneath this one.  This one is the largest, and makes a nice coverall.

Moving on, here is a picture of what we call the “East Room” or the upstairs living room.  It’s a 101 year old house, quite large, and there are currently only two of us living in the house.  We put a nice computer and TV/Monitor into the room, converted the daybed from a bed back into a couch, and when it’s cold, we hang out there instead of heating the rest of the house to comfort level.

Here’s the quilt that’s currently on the daybed/couch.


And look back at the obligatory cat picture – notice that they are cuddled up on the quilts on my bed? 

New Quilt Stuff

The Jo’s Little Women Quilt Group (Mini quilts) is still meeting and I worked hard to get the latest project (top) done the weekend before the last meeting.

Only to get a phone call the day before the meeting reminding me that it was postponed due to the teacher being at Quilt Market!

Arrgh!!!

I was actually prepared….

*sigh*

Here is the quilt top that I worked to finish.  I used bits and pieces from my recent projects to make the checkerboard strips (actually a bunch of four patches laid end to end).  The other fabrics are from small stash pieces in my “Jo’s Box”.  The four patches finish to 2 inches to give you perspective.


True to form – here is an even more mini quilt with some of the scraps from the scraps used!  I haven’t decided yet if I’m going to put another border, or just finish it for a Barbie/other doll sized piece.

Scrap Tamers

My favorite group started up again and I’m once again working on the Mystery for it.  Two of my friends are also in the group.  I have no pictures to post yet, but I am caught up on fabric cutting for the project, and am not yet behind on the piecing (due in 2 weeks!)



Saturday, October 13, 2012

Quilt Retreat

Annual Retreat… Yay!

Last weekend was the annual retreat for my quilt group.  I got there in the afternoon on Thursday and left on Sunday.  Despite having two full days and two partial days to sew, I am nowhere near caught up on projects. 

I had fun though!

So, let me talk about the trip….

I take a crap load of stuff to retreats.  

I’m an ARTIST… I may want something…. I need to take it ALL. 

Good thing we have both a minivan and a truck…. Maybe…..

Chris was racing over the weekend, in Cedar Falls, Iowa.  Because of the long drive, he was trailering the race car and needed to have the truck to pull it…. Ok, truck is out.  Since the weather is cold, I don’t need AC in a car, so I decide I’m going to take the minivan.  Plenty of room in it.  Just Ana and I going.

I’ve managed to lose my key to the minivan.  This is not a monumental occasion.  I lose keys… a lot… there’s a reason there’s a keypad on our front door and that my primary vehicle has a sensor rather than needing to insert a key. 

Wednesday night, I leave a note on the kitchen table.  It says “van keys?”

Thursday morning, I get up, and the key elves have left a key to the van on top of my note.  I take the key and head out to the van.  Key in ignition… start…

“Click, click, click”

Yeah, about that.  The battery is totally dead.

So, I’m a capable woman, I can start the battery with another car, or the booster.  But, what if the battery is toast and this keeps happening?  Remember, this is the minivan that we’ve already replaced and are in the process of selling as a “running but needs attention” vehicle.  I don’t trust it.

I then take keys for both my Challenger and my Commuter car (Chrysler 200). 
·         Open 200 trunk
·         Stare
·         Open Challenger trunk
·         Stare
·         Repeat a couple times

Yea, despite mileage sucking on the Challenger, its trunk is much bigger.  Oh well, Amery isn’t that far.

Car Issues

I have to take a quick break here and detail some things with cars for my audience.

I respect cars.  I can handle a kick ass muscle car better than most women.  I can also drive a big truck, a motorcycle, stick shift, etc.  I routinely switch back and forth – even in winter – between rear wheel and front wheel drive.

However, I am a magnet for weird things with cars.  Cumulatively, I drive ¼ or less of the miles attributed to the household vehicles, yet things that cannot be controlled ALWAYS happen to me!

Let’s just go back a few years

·         Quilt Retreat in Rochester a few years ago:  Minivan – A/C compressor seizes and van is stopped dead in tracks.  Called AAA and rented a car to get home. 
·         Six months later, same quilt retreat facility:  My Sebring – Blew the engine completely.  That particular engine had a flaw, 55K miles and it went on me, six months short of warranty expiration and was replaced under warranty
·         Couple years ago, about 18 months after the first retreat, Florida trip:  Minivan – A/C compressor seizes again while I was driving.  Chris did 95% of the driving on that trip but it seizes on me.  Fixed at a shop in Iowa.
·         October 29, 2010, driving to Wisconsin Dells:  Minivan – dead deer in the road, I ran over it.  Significant mostly because of the next item….
·         October 29, 2011, driving back from a local “mini” quilting retreat:  Minivan – while driving on a major road, a deer runs into the side of the van.  Inner City!!
·         A couple weeks ago, driving to work:  Challenger – tire blowout.

So, it totally doesn’t surprise me that the van failed to start.  Me and cars are just a natural magnet for trouble.  Throw in the quilting element and it’s a disaster.

I had control over NONE of these things!!!

Which brings me to Google maps. 

Ana and I got to the center of Amery and plugged in the address for the retreat facility.  We took a turn.  The GPS (based on Google maps on Ana’s phone), told us to proceed 600 feet and turn right.

As the phone was telling us that – this is the view from the passenger’s side of the car.


Hitting the Road

After determining to utilize the Challenger for the trip, I proceeded to pack the trunk.  I figured that I should use the trunk, and anything of Ana’s could use the backseat.  She just doesn’t take as much as me.

I succeeded in getting everything into the trunk.  However, it was arranged as a jigsaw puzzle and it was necessary to reverse the order exactly.

Ana and I started with a nearly two hour lunch at Akita – our favorite all you can eat sushi place in Woodbury.  We then went to her place in River Falls and packed the backseat with her things.  I moved into the passenger seat and slept most of the way there. 

She claims I snore

I do NOT….

Food Products in Cheese Head Land

I wisely avoided the local quilt shops (I have way too much and we didn’t need anything else in the car!!), but we made two shopping trips to local places. 

On Thursday night we hit a local grocery store.  Here are a couple items of interest:



On Friday, we went into the nearest “big” town and to the Wal-Mart.  This is what amused us there:




And, one last point of humor… Or so I think so, but Ana wasn’t as amused… a heart shaped potato at dinner:


What I Did Over My Summer  Mid Autumn Break

I worked on a bunch of little things, and did some major organizing of my project box.  However, my big project was to catch up on my pieces for the Glacier Canyon quilt.  It’s a six month class and each month we do one “technique” and the blocks for that section.  I’m doing two of them:  One in beige/green/pink/purple batiks, and the other in blacks and whites.  I caught up on pieces for both, but I only brought the other pieces for the batik one.  Here’s a picture of the pieces laid out:


While I was off sewing, my hubby won Trophy Class on both days in Cedar Falls.  This is what my kitchen table looks like now.



The pumpkins were brought home from a farm when Chris, Brandie and I went and did harvest celebrating.  We did a corn maze, played in a corn pit, bounced in a pumpkin shaped bounce house and then headed to the field for a BIG pumpkin.  Here we are heading off!


Glass Work

As I write this, I’m sitting here with three cuts from tonight’s time at the studio.  One will require a Band-Aid for a few days.  Tomorrow is Open Torch at Potek Glass studio; let’s see how many more Band-Aids I can add to the mix!

When I was working in the studio tonight, Karen – the owner, looked at my latest piece and commented on my unique style.  She also stated how much she likes it, but I took the style comment much more to heart.  Many artists are mimics.  To truly have your own style is very hard to do and the best compliment that I think any artist can get!!!

I made another large (24 x 8 inch) piece in my style tonight.  I’ll post pictures of it when it’s fired.  Its and orange/red/yellow based piece.  I also made two smaller (about 6 x 8 inches) pieces.  One is purples and one is blues.  Both are meant to be desk display sizes.  If they turn out nicely, I’m going to buy some nice display stands.  The purple one is for me…. Obviously!

Etsy Store

I started an Etsy store!!!  I’ve only put my bigger glass pieces on it at this time.  It’s there mostly to let some people look at the bigger things.  I do, however, plan on taking pictures of jewelry and getting them up there soon.


Custom orders accepted!!!

New Style

After seeing some things on Pinterest, I tried my hand at working on a new style.  Here is a picture of one piece:


Now, let me describe this.  I put down a sheet of clear glass.  Then I sprinkled powdered glass on it, drew some lines in the powder, etc.  Next, I put pieces of different colors of glass on top, creating a second layer of solid glass – just in different colors.  Lastly, I decorated the top with frit, powder, stringers, etc.

The effect that I was going for – which is VERY hard to see in these pictures – is different textures between and on top of the glass – a 3D effect if you will.

Misc


·         12 inch striped plate with embellishments


·         10 inch layered squares, sushi plate shaped


·         Striped soap dish – just a fun little piece for my house



And that’s all she wrote…

Say goodnight Gracie……